UOP 864-12
- Sulfur in Organic and Inorganic Materials by Combustion and IR Detection
- standard by UOP LLC, A Honeywell Company, 07/01/2012
- Category: UOP
$240.00
$120.00
This method is for determining total sulfur in organic materials, such aspetroleum products, and inorganic materials, such as catalysts, by combustion using a LECO S632 Sulfur Analyzer. The range of analysis is from 100% down to a lower limit of quantitation of 0.005 mass-% sulfur. Water and halogens, such as fluoride and chloride, must be removed from the carrier stream by using a trap to prevent acids from forming and damaging the infrared cell. For liquids, the method is generally limited to samples having initial boiling points above 200ºC. However, it can be applied to some wider boiling range samples, such as crude oils, where experience has shown that no losses occur during the combustion process.
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
