ULC 127
- Standard Corner Wall Method of Test for Flammability Characteristics of Non-Melting Foam Plastic Building Materials (CAN/ULC S12
- standard by Underwriters Laboratories of Canada, 2014
- Category: ULC
$229.00
$115.00
There were no major changes made to the Standard. Updates were made to the existing Reference Standards and "Smoke Developed Value (SDV)" was removed as a defined term as it is not referenced anywhere within the Standard.
This method of test for flammability characteristics is applicable to certain low density insulating materials that do not melt or drip during exposure to fire (see Appendix A). It is used in establishing the Flame Spread Classification for those foamed plastics whose flammability assessment found in CAN/ULC-S102, Standard Method of Test for Surface Burning Characteristics of Building Materials and Assemblies, requires the use of the rate formula FSV = 92.5 d/t but where the necessary parameters ("d" & "t") for use in the formula are difficult to define.
The purpose of this test is to determine the comparative burning characteristics of the material under test by exposing the material in a corner wall configuration to a test fire.
It is the intent of this method to register performance during the period of exposure and not to determine suitability for use after the test exposure."
This method of test for flammability characteristics is applicable to certain low density insulating materials that do not melt or drip during exposure to fire (see Appendix A). It is used in establishing the Flame Spread Classification for those foamed plastics whose flammability assessment found in CAN/ULC-S102, Standard Method of Test for Surface Burning Characteristics of Building Materials and Assemblies, requires the use of the rate formula FSV = 92.5 d/t but where the necessary parameters ("d" & "t") for use in the formula are difficult to define.
The purpose of this test is to determine the comparative burning characteristics of the material under test by exposing the material in a corner wall configuration to a test fire.
It is the intent of this method to register performance during the period of exposure and not to determine suitability for use after the test exposure."
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
