• ULC 107

ULC 107

  • Methods of Fire Tests of Roof Coverings (CAN/ULC S107-10)
  • standard by Underwriters Laboratories of Canada, 2010
  • Category: ULC

$194.00 $97.00

The test methods described in this Standard are applicable to roof covering materials and are intended to measure the relative fire-performance characteristics of roof coverings when exposed to fire originating from sources outside a building on which they may be installed. They are applicable to roof coverings intended for installation on either combustible or non-combustible decks when applied as intended for use.
Three classes of fire test exposure are described in this Standard.
Class A - Tests are applicable to roof coverings that are effective against severe fire exposures, are not readily flammable, afford a fairly high degree of fire protection to the roof deck, do not slip from position and are not expected to produce flying brands.
Class B - Tests are applicable to roof coverings that are effective against moderate fire exposures, are not readily flammable, afford a moderate degree of fire protection to the roof deck, do not slip from position and are not expected to produce flying brands.
Class C Tests are applicable to roof coverings that are effective against light fire exposures, are not readily flammable, afford a measurable degree of fire protection to the roof deck, do not slip from position and are not expected to produce flying brands.
It is the intent that the classifications indicate performance during tests of the types of materials and periods of exposure involved, and should not be construed as having any significance with respect to the suitability for use after fire exposure.
Roof covering materials are required to comply also with other requirements for construction, material specifications, and performance as applicable to specific types, designs, sizes and arrangements. All such additional requirements are not considered to be within the scope of these requirements for fire tests.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

ULC 716.3

ULC 716.3

Standard for Exterior Insulation and Finish Systems (EIFS) - Design Application (CAN/ULC S716.3-12)..

$80.00 $160.00

ULC 716.1

ULC 716.1

Standard for Exterior Insulation and Finish Systems (EIFS) - Materials and Systems (CAN/ULC S716.1-1..

$142.00 $283.00

ULC Subject 716.2

ULC Subject 716.2

STANDARD FOR EXTERIOR INSULATION AND FINISH SYSTEMS (EIFS) - INSTALLATION OF EIFS COMPONENTS AND WAT..

$86.00 $171.00

ULC Subject 716.3

ULC Subject 716.3

STANDARD FOR EXTERIOR INSULATION AND FINISH SYSTEMS (EIFS) - DESIGN APPLICATION (Bulletin, 12/6/2012..

$87.00 $173.00