SMPTE 305M-2005
- Television - Serial Data Transport Interface (SDTI)
- standard by Society of Motion Picture and Television Engineers,
- Category: SMPTE
$75.00
$38.00
This standard specifies a data stream protocol used to transport packetized data. The data packets and synchronizing signals are only compatible with 10-bit operation of SMPTE 259M (SDI)as shown in Figure 1. Parameters of the protocol are compatible with the 4:2:2 component SDI format as shown in Figure 2. The data stream uses the digital television active line for the payload. Ancillary data packets defined by SMPTE 291M in the horizontal blanking interval are used to identify the payload application. This standard does not provide the specific protocol for the many SDTI data types. Payload data may be organized in fixed length blocks or variable length blocks. Additional documents will describe particular applications of this standard and will include details of data formatting, data location and other parameters, such as compression and error correction, if applicable. NOTE - SMPTE 352M labels are not used for SDTI application of SMPTE 259M.
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
