SAE J476_201302
- Dryseal Pipe Threads (Stabilized: Feb 2013)
- standard by SAE International, 02/01/2013
- Category: SAE
$81.00
$41.00
This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying the continued suitability of technical guidance. Dry Seal threads should be in a ccordance with ASME B1.20.3>p>.The Dryseal American Standard Taper Pipe Thread, the Dryseal American fuel Internal Straight Pipe Thread and the Dryseal American intermediate internal Straight Pipe Thread covered by this standard conform with the American Standard ASA-B2.2. The Dryseal SAE-Short Taper Pipe thread in this standard conforms with the Dryseal American Standard Taper pipe thread except for the length of thread, which is shortened for increased clearance and economy of material. The significant feature of the dryseal thread is controlled truncation at the crest and root to assure metal to metal contact coincident with or prior to flank contact. Contact at the crest and root prevents spiral leakage and insures pressure-tight joints without the use of a lubricant or sealer. Lubricants, if not functionally objectionable, may be used to minimize the possibility of galling in assembly.
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
