• SAE J3000_200910

SAE J3000_200910

  • Thermoplastic Elastomer Classification System
  • standard by SAE International, 10/15/2009
  • Category: SAE

$81.00 $41.00

This classification system tabulates the properties of thermoplastic elastomers (TPEs) that are intended for, but not limited to, use in automotive applications.

NOTE 1~For the purposes of this document a TPE is defined as a polymeric material that, without further chemical modification, is capable of recovering from deformations quickly and forcibly and is also capable of being repeatedly softened by heating and hardened by cooling within a temperature range characteristic of the material.

NOTE 2~When the TPE product is to be used for purposes where the requirements are too specific to be completely prescribed by this classification system, it is necessary for the purchaser to consult the supplier in advance to establish the appropriate properties, test methods, and specification test limits.

This classification system is based on the premise that the properties of TPEs can be arranged into characteristic material designations. These designations are determined by type, based on resistance to heat aging; and class, based on resistance to volume change resulting from oil immersion. Basic levels are thus established which, together with values describing additional requirements, permit complete description of the properties of all TPEs.

In all cases where provision of this classification system would conflict with those of the detailed specifications for a particular product, the latter shall take precedence.

This classification is based on SI units.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AS4687E

SAE AS4687E

FITTING ASSEMBLY, ELBOW, 90¿¿, FLARELESS AND SHORT FLARELESS, REDUCER, RETAINED NUT..

$41.00 $81.00

SAE AS4690D

SAE AS4690D

FITTING, TEE, REDUCER, BULKHEAD ON SIDE, FLARELESS AND SHORT FLARELESS..

$41.00 $81.00

SAE AS5506/3

SAE AS5506/3

Architecture Analysis and Design Language (AADL) Annex D: Behavior Model Annex..

$41.00 $81.00

SAE J1915_201708

SAE J1915_201708

Recommended Remanufacturing Procedures for Manual Transmission Clutch Assemblies (Stabilized: Aug 20..

$41.00 $81.00