• SAE J2782_201010

SAE J2782_201010

  • Performance Specifications for a Midsize Male Pedestrian Research Dummy
  • standard by SAE International, 10/14/2010
  • Category: SAE

$81.00 $41.00

While it is recognized that collisions involve pedestrians of all sizes, this Information Report addresses performance specifications for a midsize adult male research dummy. This approach stems from the greater knowledge of biomechanics and existing dummy technologies for the midsize male relative to other adult sizes and children. While not the initial objective, it is envisioned that additional performance specifications for other sizes of pedestrian research dummies will be developed in the future based on accepted scaling procedures.

The specific requirements for the pedestrian dummy have been based on a collective assessment of pedestrian injury, response, and anthropometry priorities from the experimental, epidemiologic, and computational literature. In general, the objective was to specify performance specifications based on human characteristics and the impact response of postmortem human subjects rather than to specify the design of a particular physical device.

Based on the perceived applications for a research pedestrian dummy, the primary focus of this document centered on biofidelic whole-body kinematics during a vehicle-pedestrian impact. Specific body regions were prioritized based on a combination of pedestrian injury, including both severity and frequency. Based on the priorities established by a review committee, the specifications provided in this document include both mandatory and recommended requirements as indicated by the terms "shall" and "should," respectively. As pedestrian injury trends and dummy hardware continue to evolve in the future, it is anticipated that this document will expand to include more mandatory requirements in more body regions.

Finally, it should be noted that the test procedures described in this document only apply to the specific tests required to assess pedestrian dummy biofidelity. It is anticipated that pedestrian dummies meeting the performance criteria of this document will be used in a wide variety of tests, requiring specialized test and data procedures.

This document specifies the performance requirements for a midsize adult male pedestrian dummy that can be used to study pedestrian-vehicle interactions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5716J

SAE AMS5716J

Iron-Nickel Alloy, Heat Resistant, Bars, Wire, Forgings, and Rings 44Fe - 18.5Cr - 35.5Ni - 1.1Si So..

$41.00 $81.00

SAE AMS5803F

SAE AMS5803F

Steel, Corrosion and Heat-Resistant, Welding Wire 16.4Cr - 4.8Ni - 0.22Cb (Nb) - 3.6Cu Consumable El..

$41.00 $81.00

SAE AMS5854B

SAE AMS5854B

Nickel Alloy, Corrosion and Heat-Resistant, Bars, Wire, Forgings, and Rings 61Ni - 20.5Cr - 8.5Mo - ..

$41.00 $81.00

SAE AMS5922A

SAE AMS5922A

Steel, Corrosion-Resistant, Bars, and Forgings 10Cr - 5.5Ni - 14Co - 2Mo - 1W (0.19-0.23C) Vacuum In..

$41.00 $81.00