• SAE J2338_201102

SAE J2338_201102

  • Recommendations of the SAE Task Force on Headlamp Mounting Height (Stabilized: Feb 2011)
  • standard by SAE International, 02/24/2011
  • Category: SAE

$81.00 $41.00

The SAE International task force on headlamp mounting height has considered the ramificaitons of reducing the maximum mounting height of headlamps on highway vehicles. The task force has concluded that it is the best interest of the driving public to make a substantial reduction in the recommended maximum height at which headlamps, particularly lower beam headlamps, may be mounted. Heights as low as 36 to 40 in (90 to 100 cm) have been considered. New tractor vehicles are in fact being designed with headlamps mounted in this range. Further recommendations were withheld in anticipation of tests to demonstrate the effect of mounting height on the legibility of certain overhead signs.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5388K

SAE AMS5388K

Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 53.3Ni - 16.5Cr - 17Mo - 4.5W - 5.8F..

$41.00 $81.00

SAE AMS6945B

SAE AMS6945B

Titanium Alloy, Single Melt, Sheet, Strip, and Plate 6Al - 4V Annealed..

$41.00 $81.00

SAE AMS6946C

SAE AMS6946C

Titanium Alloy, Sheet, Strip, and Plate 4Al - 2.5V - 1.5Fe Annealed..

$41.00 $81.00

SAE AMS5390G

SAE AMS5390G

Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 47.5Ni - 22Cr - 1.5Co - 9Mo - 0.60W ..

$41.00 $81.00