• SAE J1113/1_201203

SAE J1113/1_201203

  • Electromagnetic Compatibility Measurement Procedures and Limits for Components of Vehicles, Boats (up to 15 m), and Machines (Ex
  • standard by SAE International, 03/23/2012
  • Category: SAE

$81.00 $41.00

This SAE Standard covers the measurement of voltage transient immunity, and within the applicable frequency ranges, audio (AF) and radio frequency (RF) immunity, and conducted and radiated emissions.

By reference, ISO 11452-3, ISO 11452-7, ISO 11452-8, ISO 11452-10, ISO 11452-11, and the emissions portion of ISO 7637-2 are adopted in place of SAE J1113-24, SAE J1113-3, SAE J1113-22, SAE J1113-2, SAE J1113-28, and SAE J1113-42, respectively. In the event that an amendment is made or a new edition is published, the new ISO document shall become part of this standard six months after the publication of the ISO document. SAE reserves the right to identify exceptions to the published ISO document with the exceptions to be documented in SAE J1113-24, SAE J1113-3, SAE J1113-22, SAE J1113-2, SAE J1113-28, and SAE J1113-42 respectively.

By reference, IEC CISPR 25 is adopted as the standard for the measurement of component emissions. In the event that an Amendment is made to the referenced edition of CISPR 25 or a new edition is published, the new IEC document shall become part of this standard six months after the publication of the IEC document. SAE reserves the right to identify exceptions to the published IEC document with the exceptions to be documented in SAE J1113-41.

Emissions from intentional radiators are not controlled by this document. (See applicable appropriate regulatory documents.) The immunity of commercial mains powered equipment to over voltages and line transients is not covered by this document (See applicable UL or other appropriate agency documents.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4935L

SAE AMS4935L

Titanium Alloy Extrusions and Flash Welded Rings 6Al - 4V Annealed Beta Processed..

$41.00 $81.00

SAE AMS6407K

SAE AMS6407K

Steel, Bars, Forgings, and Tubing 1.2Cr - 2.0Ni - 0.45Mo (0.27 ¿¿¿ 0.33C)..

$41.00 $81.00

SAE ARP4014A

SAE ARP4014A

Aircraft Turbine Engine Pneumatic Component Contaminated Air Endurance Test..

$41.00 $81.00

SAE AS1003J

SAE AS1003J

FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, FLARELESS..

$41.00 $81.00