• SAE ARP5595A

SAE ARP5595A

  • Cargo Restraint Straps - Utilization Guidelines
  • standard by SAE International, 11/04/2011
  • Category: SAE

$81.00 $41.00

This Aerospace Recommended Practice aims at providing general utilization guidelines and calculation methods adequate to guarantee the effectiveness and ultimate load strength of tie-down/lashing arrangements performed to restrain cargo on board civil transport aircraft during flight:

a. cargo loaded and tied down onto airworthiness approved air cargo pallets, themselves restrained into aircraft lower deck, main deck or upper deck cargo systems meeting the requirements of air cargo pallets approved in accordance with NAS 3610 or AS36100A, or

b. additional tie-down on aircraft structure when necessitated by pallet maximum gross mass or CG, or

c. individual pieces of cargo, or pieces of cargo placed onto an unrestrained ("floating") pallet into either lower deck or main deck or upper deck containerized cargo compartments of an aircraft, or

d. individual pieces of load loaded in non-containerized (bulk loaded) baggage or cargo compartments.

This ARP aims at providing industry recognized means of complying with Airworthiness Authorities general regulations applicable to load securing on board civil transport aircraft (see 14 CFR Parts 25 and 121, in 2.1, Applicable Documents), and aircraft manufacturers Authority approved Weight and Balance Manuals for each aircraft type as specified therein. It is not the intent of this ARP to specify when restraint straps should be used, but how they should be used. It shall not, under any circumstance, supersede the requirements of any of these documents, which shall take precedence at all times.

This ARP therefore provides recommended practical means of compliance with flight safety objectives, intended to be available as a common base for carriers as well as their airport handling agents when establishing their own in-house publications and staff training programs.

This ARP document is not intended to apply to cargo restraint on board military transport aircraft, and does not take into account any specific criteria for military aircraft. Nothing, however, precludes it being used for guidelines in this case, it pertaining to the military operator to identify and implement any additional applicable criteria.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE MAP1753B

SAE MAP1753B

Hole Sizes, Recommended for Metric Fasteners on Propulsion Equipment (Stabilized: Aug 2018)..

$41.00 $81.00

SAE MA3374D

SAE MA3374D

Bolts and Screws, UNS S66286, Corrosion and Heat Resistant Steel, Procurement Specification, Metric..

$41.00 $81.00

SAE AIR1758A

SAE AIR1758A

Limits and Fits - International Metric Tolerance System (Stabilized: Aug 2018)..

$41.00 $81.00

SAE J986_201808

SAE J986_201808

Sound Level for Passenger Cars and Light Trucks..

$41.00 $81.00