SAE AMS6488H
- Steel, Bars and Forgings 5.0Cr - 1.3Mo - 0.5V - (0.38 - 0.43C)
- standard by SAE International, 01/16/2008
- Category: SAE
$81.00
$41.00
This specification has been declared CANCELLED by the Aerospace Materials Division, SAE, as of January 2008. By this action, this document will remain listed in the Numerical Section of the Index of Aerospace Material Specifications indicating that it has been CANCELLED.Similar but not necessarily identical products are covered in the following specification. However, this listing is provided for information only and does not constitute authority to substitute this specification for the CANCELLED specification.SAE AMS 6487 Steel, Bars, and Forgings 5.0Cr -1.3Mo - 0.50V (0.38 - 0.43C) (H-11) Consumable Electrode Vacuum MeltedThis specification covers a low-alloy steel in the form of bars, forgings, and forging stock.These products have been used typically for parts requiring a steel capable of through-hardening to a minimum hardness of 50 HRC in section thicknesses up to 12 inches (305 mm) with relatively high levels of strength, fatigue resistance, ductility, and thermal stability in service from -100 degrees to +1000 degrees F (-73 degrees to +538 degrees C), but usage is not limited to such applications.Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking after heat treatment; SAE ARP 1110 recommends practices to minimize such conditions.
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
