SAE AMS6408C
- Steel, Hotwork Tool, Bars and Forgings 5.2Cr 1.5Mo 1.0V (0.35-0.45C) (H-13) Electroslag Remelted (ESR) or Consumable Electrode V
- standard by SAE International, 03/09/2009
- Category: SAE
$81.00
$41.00
This specification covers a premium aircraft-quality, low-alloy steel in the form of bars, forgings, and forging stock.These products have been used typically for hotwork tooling or for parts requiring a steel capable of through-hardening to a minimum hardness of 50 HRC in section thicknesses up to 12 inches (305 mm) with relatively high levels of strength, fatigue resistance, ductility, and thermal stability for use in service from -100 to +1000 \mDF (-73 to 538 \mDC) and where such parts may require welding, but usage is not limited to such applications.
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
