• SAE AMS6352K

SAE AMS6352K

  • Steel Sheet, Strip, and Plate 0.95Cr – 0.20Mo (0.33 – 0.38C) (SAE 4135)
  • standard by SAE International, 10/04/2013
  • Category: SAE

$81.00 $41.00

This specification covers an aircraft quality, low alloy steel in the form of sheet, strip, and plate. These products have been used typically for heat treated parts and structures that may require welding during fabrication, but usage is not limited to such applications. It may be through-hardened to a minimum tensile strength of 180 ksi (1241 MPa) in sections 0.125 inch (3.18 mm) and under in nominal thickness and proportionately lower strength in heavier section thicknesses.
SAE J427_201801

SAE J427_201801

Penetrating Radiation Inspection (Stabilized: Jan 2018)..

$41.00 $81.00

SAE J428_201801

SAE J428_201801

Ultrasonic Inspection (Stabilized: Jan 2018)..

$41.00 $81.00

SAE J431_201801

SAE J431_201801

Automotive Gray Iron Castings (Stabilized: Jan 2018)..

$41.00 $81.00

SAE J437_201801

SAE J437_201801

Selection and Heat Treatment of Tool and Die Steels (Stabilized: Jan 2018)..

$41.00 $81.00