SAE AMS6320M
- Steel Bars, Forgings, and Rings, 0.50Cr 0.55Ni 0.25Mo (0.33-0.38C) (SAE 8735)
- standard by SAE International, 11/20/2007
- Category: SAE
$81.00
$41.00
This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, flash welded rings, and stock for forging or flash welded rings.These products have been used typically for parts, 0.75 inch (19.0 mm) and under in nominal section thickness at the time of heat treatment requiring a through-hardening steel capable of developing hardness as high as 40 HRC when properly hardened and tempered and for parts of greater thickness but requiring proportionally lower hardness but usage is not limited to such applications.
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
