SAE AMS5934A
- Steel, Extra High Toughness, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrustions 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacu
- standard by SAE International, 11/14/2014
- Category: SAE
$81.00
$41.00
These products have been used typically for parts requiring extra high toughness, corrosion resistance, stress-corrosion resistance, high strength up to 600 degrees F (316 degrees C), and good ductility and strength in the transverse direction in large section sizes, but usage is not limited to such applications.
Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP 1110 recommends practices to minimize such conditions.
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
