SAE AMS5637H
- Steel, Corrosion Resistant, Bars and Wire 18Cr - 9.0Ni (SAE 30302) Solution Heat Treated, Cold Drawn and Stress Relieved 125 ksi
- standard by SAE International, 07/25/2012
- Category: SAE
$81.00
$41.00
This specification covers a corrosion-resistant steel in the form of bars and wire 0.75 inch (19 mm) and under in nominal diameter or distance between parallel sides.These products have been used typically for small parts, such as bolts, screws, and clevis pins, requiring corrosion resistance up to 700 degrees F (371 degrees C) and which may be fabricated by heading or by machining from bars or wire and roll threading, but usage is not limited to such applications.
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
