• SAE AMS4915K

SAE AMS4915K

  • Titanium Alloy Sheet, Strip, and Plate 8Al 1V 1Mo Single Annealed
  • standard by SAE International, 12/19/2008
  • Category: SAE

$81.00 $41.00

This specification covers a titanium alloy in the form of sheet, strip, and plate.

These products have been used typically for parts requiring strength up to 800 \mDF (427 \mDC) where fracture toughness is not critical.

Certain processing procedures and service conditions may cause these products to become subject to stress-corrosion cracking; SAE ARP 982 recommends practices to minimize such conditions.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4224C

SAE AMS4224C

Aluminum Alloy Castings, Sand, 4.0Cu - 2.1Ni - 2.0Mg - 0.30Cr - 0.30Mn - 0.13T - 0.13V (243.0), Stab..

$41.00 $81.00

SAE AMS2825B

SAE AMS2825B

Material Safety Data Sheets..

$41.00 $81.00

SAE AMS2430R

SAE AMS2430R

Shot Peening, Automatic..

$41.00 $81.00

SAE AS18280E

SAE AS18280E

Fittings, 24° Cone Flareless, Fluid Connection, 3000 psi..

$41.00 $81.00