SAE AMS4165H
- Aluminum Alloy, Extrusions 4.4Cu - 1.5Mg - 0.60Mn (2024-T3511) Solution Heat Treated, Stress-Relieved by Stretching, and Straigh
- standard by SAE International, 12/03/2013
- Category: SAE
$81.00
$41.00
This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing.These extrusions have been used typically for parts subject to excessive warpage during machining due to residual stresses and for parts requiring high strength and whose fabrication does not normally involve welding, but usage is not limited to such applications.Certain processing procedures may cause these extrusions to be susceptible to stress-corrosion cracking; SAE ARP 823 recommends practices to minimize such conditions.
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
