SAE AMS4163E
- Aluminum Alloy, Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T3511) Solution Heat Treated, Stress-Relieved by Stret
- standard by SAE International, 02/15/2012
- Category: SAE
$81.00
$41.00
This specification covers an aluminum alloy in the form of extruded bars, rods, wire, profiles, and tubing.These extrusions have been used typically for structural parts requiring high strength up to 500 \mDF (260 \mDC) after proper precipitation heat treatment, but usage is not limited to such applications and which may require welding during fabrication.Certain design and fabricating procedures may cause material in the specified condition to be susceptible to stress-corrosion cracking; SAE ARP 823 recommends practices to minimize such conditions.
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
