SAE AMS4130M
- Aluminum Alloy Die Forgings, 4.4Cu - 0.85Si - 0.80Mn (2025-T6), Solution and Precipitation Heat Treated (Noncurrent: Aug 2009)
- standard by SAE International, 08/05/2009
- Category: SAE
$81.00
$41.00
This specification has been declared NONCURRENT by the Aerospace Materials Division, SAE, as of August 2009. It is recommended, therefore, that this specification not be specified for new designs. NONCURRENT refers to those materials which may have been widely used previously and which may be required for production or processing of existing designs in the future. The Aerospace Materials Division, however, does not recommend these specifications for future use in new designs.This specification covers an aluminum alloy in the form of die forgings and forging stock.These products have been used typically for complex-shaped parts requiring moderate strength and good forgeability of the material, but usage is not limited to such applications.Certain design and processing procedures may cause these forgings to become susceptible to stress-corrosion cracking; ARP823 recommends practices to minimize such conditions.
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
