SAE AMS4120R
- Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 4.4Cu - 1.5Mg - 0.60Mn (2024) Solution Heat Treated and Naturally A
- standard by SAE International, 05/19/2010
- Category: SAE
$81.00
$41.00
This specification covers aluminum alloy in the form of bars, rods, and wire.
These products have been used typically for parts requiring good strength and whose fabrication does not involve welding, but usage is not limited to such applications.
Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; SAE ARP 823 recommends practices to minimize such conditions.
These products have been used typically for parts requiring good strength and whose fabrication does not involve welding, but usage is not limited to such applications.
Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; SAE ARP 823 recommends practices to minimize such conditions.
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
