SAE AMS2469H
- Hard Anodic Coating on Aluminum and Aluminum Alloys
- standard by SAE International, 07/15/2008
- Category: SAE
$81.00
$41.00
This specification establishes the requirements for a hard anodic coating on aluminum and aluminum alloys.This process has been used typically to increase, by formation of a dense aluminum oxide, surface hardness andresistance to abrasion and corrosion of aluminum and aluminum-alloy parts containing, in general, less than 5% copper or 8% silicon or a total of 8% of both, but usage is not limited to such applications. Alloys with higher alloy content can be coated satisfactorily with proper precautions in processing. Careful consideration should be given when using this process on highly-stressed parts because of the resultant marked lowering of fatigue performance and on parts with sharp corners and edges where chipping may result.
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
