• NSF 350-2014

NSF 350-2014

  • Onsite residential and commercial water reuse treatment systems
  • standard by NSF International, 12/08/2014
  • Category: NSF

$160.00 $80.00

The purpose of this Standard is to establish minimum material, design, and construction, andperformance requirements for onsite residential and commercial water treatment systems. This Standardalso specifies the minimum literature that manufacturers shall supply to authorized representatives andowners as well as the minimum service-related obligations that a manufacturer shall extend to owners.
This Standard contains minimum requirements for onsite residential and commercial water treatment systems. Systems may include the following:
  • Graywater treatment systems having a rated treatment capacity up to 5,678 L/day (1,500 gal/day). This applies to onsite residential and commercial treatment systems that treat graywater, those that treat laundry water from residential laundry facilities, and those that treat bathing water.
  • Commercial treatment systems - this applies to onsite commercial treatment systems that treat combined commercial facility wastewater and commercial facility laundry water of any capacity, and those treatment systems that treat graywater from commercial facilities with capacities exceeding 5,678 L/day (1,500 gal/day). These systems shall be performance tested and evaluated at the location of the reuse system installation, using the wastewater generated onsite from the facility serving the treatment system.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS4342F

SAE AMS4342F

Aluminum Alloy, Extrusions 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T74511) Solution Heat Treated, Stres..

$41.00 $81.00

SAE AMS4402A

SAE AMS4402A

Aluminum Alloy, Extruded Profiles (2024-T432) 4.4Cu - 1.5Mg - 0.6Mn Annealed, Stretch Formed, Soluti..

$41.00 $81.00

SAE AMS4406A

SAE AMS4406A

Aluminum Alloy, Centrifugal Castings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (709.0-T61) Hot Isostatically Pr..

$41.00 $81.00

SAE AMS6953

SAE AMS6953

Titanium Alloy Sheet 6Al ¿¿¿ 4Sn ¿¿¿ 3Nb ¿¿¿ 0.5Mo ¿¿¿ 0.3Si, Duplex Annealed..

$41.00 $81.00