• NSF 143-2006

NSF 143-2006

  • Environmentally preferable products - Hard surface cleaners
  • standard by NSF International, 01/06/2006
  • Category: NSF

$165.00 $83.00

This Standard specifies requirements for a PDP-EMS for hard surface cleaner products. A hard surface cleaner developed and produced under a PDP-EMS that meets the requirements of this Standard and specified environmental attribute targets shall be considered an EPP to the extent that the attribute targets express EPP. An EPP is a product that produces a smaller environmental footprint when compared to other competing products in the market.

This Standard (1) addresses the ethics of pollution prevention and responsible energy use in the entire product life cycle through which environmental issues are systematically integrated into product design and (2) addresses biodegradability and enables identification of chemicals that may potentially persist, bio-accumulate, and be toxic in the environment, i.e., PBT chemicals. This Standard does not itself set but does suggest specific environmental performance criteria for hard surface cleaners or for their product development processes. It does suggest example product performance criteria that could be useful in building a PDP-EMS for hard surface cleaners. This example can be used to establish goals for internal EPP criteria to be used by the manufacturer or used in conjunction with any standard appropriate to individual customer or marketplace.

This Standard shall enable a manufacturer of hard surface cleaners to formulate a PDP-EMS covering those environmental aspects that the manufacturer can control. The implemented PDP-EMS shall enhance the manufacturer's capabilities at every stage of product design decision-making to minimize upfront environmental and human health risks. Annex A contains suggested parameters for certification programs. Conformance to this Standard ensures that the manufacturer has demonstrated the use of a continually improvable PDP-EMS to develop an EPP. Marketing EPPs promotes environmentally preferable purchasing practices among consumers, industry, and government purchasers.

PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

SAE AMS5743J

SAE AMS5743J

Steel, Corrosion and Heat-Resistant, Bars and Forgings 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Solution Heat ..

$41.00 $81.00

SAE AMS5745F

SAE AMS5745F

Steel, Corrosion and Heat-Resistant, Bars and Forgings 16.5Cr - 4.5Ni - 2.9Mo - 0.10N Equalized and ..

$41.00 $81.00

SAE AMS5789D

SAE AMS5789D

Cobalt Alloy, Corrosion and Heat-Resistant, Welding Wire 54Co - 25.5Cr - 10.5Ni - 7.5W..

$41.00 $81.00

SAE AMS5510S

SAE AMS5510S

Steel, Corrosion and Heat-Resistant, Sheet, Strip and Plate 18Cr - 10.5Ni - 0.40Ti (SAE 30321) Solut..

$41.00 $81.00