• NACE TM0197-2010

NACE TM0197-2010

  • Laboratory Screening Test to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Barium Sulfate or Stronti
  • standard by National Association of Corrosion Engineers, 10/22/2
  • Category: NACE

$59.00 $30.00

This standard describes a test method to screen scale inhibitors for their ability to prevent precipitation of BaSO4or SrSO4, or both, from oilfield brines. The test method does not fix such critical variables as test brine composition,test temperature, and test duration. It is the responsibility of the user of this standard to determine the mostappropriate choices for these parameters. For example, Pritchard, et al.2 address static tests using North Sea brines.
This standard is intended only for ranking the performance of different scale inhibitors under laboratoryconditions. It is not intended to establish field treatment rates. CAUTION: Unique field conditions encountered mayalter the performance ranking of the scale inhibitors.
Factors such as reaction kinetics, fluid velocity, transient composition, temperature and pressure changes, scaleadherence, and solids dispersion can significantly affect scale deposition under field conditions. Consideration ofthese parameters is outside the scope of this standard. However, field conditions, field brine composition, and othervariables noted above should be considered at some point in the scale inhibitor evaluation prior to final selection forfield use.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

NACE RP0182-95

NACE RP0182-95

Standard Recommended Practice - Initial Conditioning of Cooling Water Equipment..

$17.00 $33.00

NACE TM0298-2003

NACE TM0298-2003

Evaluating the Compatibility of FRP Pipe and Tubulars with Oilfield Environments..

$89.00 $177.00

NACE TM0183-00

NACE TM0183-00

Standard Test Method - Evaluation of Internal Plastic Coatings for Corrosion Control of Tubular Good..

$94.00 $188.00

NACE 37541-7

NACE 37541-7

..

$299.00 $598.00