• MSS SP-91-2009

MSS SP-91-2009

  • Guidelines for Manual Operation of Valves
  • standard by Manufacturers Standardization Society, 11/01/2009
  • Category: MSS

$77.00 $39.00

PURPOSE
The purpose of this Standard Practice is to provide valve users with information for use in evaluating the manual operation of valves.
It must be understood that this information is general in nature and must be supplemented by specific operational data for the valve and service conditions to be experienced. The maximum and minimum torque ratings of specific valve and actuator types are not covered by this Standard Practice, but must be considered when applying manual input devices to any specific valve. Data from teh valve and actuator manufacturers should be consulted regarding valve and actuator types and ratings.
SCOPE
This Standard Practice provides guidelines for the operation of manually actuated valves as affected by the valve operator's input.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

MSS SP-72-2010

MSS SP-72-2010

Ball Valves with Flanged or Butt-Welding Ends for General Service..

$88.00 $175.00

MSS SP-43-2008 Errata

MSS SP-43-2008 Errata

Errata Sheet for MSS SP-43-2008 Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corro..

$8.00 $10.00

MSS SP-44-2010

MSS SP-44-2010

Steel Pipeline Flanges, Includes Errata (May 2011)..

$70.00 $139.00

MSS SP-110-2010 Errata

MSS SP-110-2010 Errata

Errata Sheet for Ball Valves Threaded, Socket-Welding, Solder Joint, Grooved and Flared Ends..

$8.00 $10.00