MSS SP-72-2010a
- Ball Valves with Flanged or Butt-Welding Ends for General Service
- standard by Manufacturers Standardization Society, 04/01/2012
- Category: MSS
$92.00
$46.00
1. SCOPE
1.1 This Standard Practice covers flanged or butt-weld end ball valves having in general, but not restricted to, round openings which may be full port, regular port, or reduced port types. The following characteristics shall be considered standard practice unless otherwise specified by agreement between manufacturer and purchaser.
1.2 Valves covered by this Standard Practice are suitable for use in general liquid and gas service.Their service pressures and temperatures generally conform to standards cited in Paragraph 2, but maybe restricted by the materials used for their seats and seals, or by other special considerations.
The 2010a Edition of MSS SP-72 updates the replaced 2010 Edition by: (1) re-including (from previous editions) Section 3.1.2 and the first sentence of Section 5.3.1; (2) additional descriptive notes were inserted in Sections 7.1.4 and 7.2.2; (3) the equation in Section 7.2.4.3 was clarified; (4) corrected the definition of MYS1 in Section 7.1.4 and AYS2 in Section 7.1.4; (5) corrected the definition of AYS5 and AYS6 in Section 7.2.2; and (6) additional editorial andconforming corrections.
1.1 This Standard Practice covers flanged or butt-weld end ball valves having in general, but not restricted to, round openings which may be full port, regular port, or reduced port types. The following characteristics shall be considered standard practice unless otherwise specified by agreement between manufacturer and purchaser.
1.2 Valves covered by this Standard Practice are suitable for use in general liquid and gas service.Their service pressures and temperatures generally conform to standards cited in Paragraph 2, but maybe restricted by the materials used for their seats and seals, or by other special considerations.
The 2010a Edition of MSS SP-72 updates the replaced 2010 Edition by: (1) re-including (from previous editions) Section 3.1.2 and the first sentence of Section 5.3.1; (2) additional descriptive notes were inserted in Sections 7.1.4 and 7.2.2; (3) the equation in Section 7.2.4.3 was clarified; (4) corrected the definition of MYS1 in Section 7.1.4 and AYS2 in Section 7.1.4; (5) corrected the definition of AYS5 and AYS6 in Section 7.2.2; and (6) additional editorial andconforming corrections.
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
