ISA 75.10.01-2013
- General Requirements for Clamp or Pinch Valves
- standard by The International Society of Automation, 12/20/2013
- Category: ISA
$55.00
$28.00
This document applies to valves, sizes 1 inch through 26 inches, of the clamp or pinch valve design, incorporating clamp or pinch elements.
The purpose of this document is to establish requirements for clamp or pinch valves.
The following requirements are established:
a) Tests for pressure retaining parts and shutoff integrity prior to shipment
b) Marking requirements
c) Procedures for determining the flow coefficient and other related sizing factors
This document excludes solenoid actuated valves and direct fluid actuated valves.
The purpose of this document is to establish requirements for clamp or pinch valves.
The following requirements are established:
a) Tests for pressure retaining parts and shutoff integrity prior to shipment
b) Marking requirements
c) Procedures for determining the flow coefficient and other related sizing factors
This document excludes solenoid actuated valves and direct fluid actuated valves.
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
