IEEE 501-1978
- IEEE Standard Seismic Testing of Relays
- standard by IEEE, 04/28/1978
- Category: IEEE
$52.00
$26.00
- Superseded.This is a standard for developing data related to the seismic capabilities of relays. This standardcompliments ANSI/IEEE Std 344-1975, Recommended Practices for Seismic Qualification of Class IE Equipment for Nuclear Power Generating Stations, which provides general guidelines for developingdata related to seismic qualification of equipment used in nuclear generating plants.Data must be developed by testing rather than analytical means since protective relays fall intothe category of complex devices as described in Section 5 of ANSI/IEEE Std 344-1975; however, analysis may be used in data reduction, in reconciling response spectra, in justifying methods of evaluating changes, and in justifying seismic qualifications of relays of similar construction.While aging is recognized as a potential influence on the seismic capability of relays, insufficientdefinition presently exists to permit realistic simulation of end-of-life for various relays. When applicabledefinition of the various degrading factors and methods of accelerating the effect of thesefactors is developed in other related standards, they should be considered in the previbration preparation.It should be emphasized that while a primary purpose in preparing this standard was to cover theapplication of relays to nuclear generating plants, the standard is not restricted to this application.This standard may be applied to any area in which the seismic response of relays is a design consideration.
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
