ASTM F2159-18
- Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing
- standard by ASTM International, 04/01/2018
- Category: ASTM
$58.00
$29.00
1.1 This specification establishes requirements for sulfone plastic insert fittings and copper crimp rings for four sizes (³/8 , 1/2 , and ³/4 and 1) of cross-linked polyethylene (PEX) tubing that meet the requirements for Specification F876 and polyethylene of raised temperature (PE-RT) tubing that meet the requirements of Specifications F2623 and F2769. These fittings are intended for use in 100 psi (690 kPa) cold- and hot-water distribution systems operating at temperatures up to and including 180 °F (82 °C). Included are the requirements for material, molded part properties, performance, workmanship, dimensions, and markings to be used on the fittings and rings.
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
ASTM E2937-18
Standard Guide for Using Infrared Spectroscopy in Forensic Paint Examinations..
$24.00 $48.00
ASTM F2367-04a(2018)
Standard Specification for Labeling for Upright Brooms for Consumer and Institutional Use..
$21.00 $42.00
ASTM D5889/D5889M-18
Standard Practice for Quality Control of Geosynthetic Clay Liners..
$21.00 $42.00