ASTM E2994-16
- Standard Test Method for Analysis of Titanium and Titanium Alloys by Spark Atomic Emission Spectrometry and Glow Discharge Atomi
- standard by ASTM International, 04/15/2016
- Category: ASTM
$54.00
$27.00
1.1 This test method describes the analysis of titanium and its alloys by spark atomic emission spectrometry (Spark-AES) and glow discharge atomic emission spectrometry (GD-AES). The titanium specimen to be analyzed may be in the form of a disk, casting, foil, sheet, plate, extrusion or some other wrought form or shape. The elements and ranges covered in the scope by spark-AES of this method are listed below.
| Element | Tested Mass Fraction Range (%) |
| Aluminum | 0.008 to 7.0 |
| Chromium | 0.006 to 0.1 |
| Copper | 0.014 to 0.1 |
| Iron | 0.043 to 0.3 |
| Manganese | 0.005 to 0.1 |
| Molybdenum | 0.014 to 0.1 |
| Nickel | 0.006 to 0.1 |
| Silicon | 0.018 to 0.1 |
| Tin | 0.02 to 0.1 |
| Vanadium | 0.015 to 5.0 |
| Zirconium | 0.013 to 0.1 |
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
ASTM D7191-18
Standard Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor..
$21.00 $42.00
ASTM D7496-18
Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer..
$21.00 $42.00
ASTM D8235-18
Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Gasolines for Use as ..
$21.00 $42.00
ASTM E853-18
Standard Practice for Analysis and Interpretation of Light-Water Reactor Surveillance Neutron Exposu..
$24.00 $48.00