ASTM E2769-18
- Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading
- standard by ASTM International, 06/01/2018
- Category: ASTM
$48.00
$24.00
1.1 This test method describes the use of linear controlled-rate-of-loading in three-point bending to determine the elastic modulus of isotropic specimens in the form of rectangular bars using a thermomechanical analyzer (TMA).
Note 1: This method is intended to provide results similar to those of Test Methods D790 or D5934 but is performed on a thermomechanical analyzer using smaller test specimens. Until the user demonstrates equivalence, the results of this method shall be considered independent and unrelated to those of Test Methods D790 or D5934.
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
ASTM B995-15a
Standard Test Method for Chloride Resistance Test for Chromium Electroplated Parts (Russian Mud Test..
$24.00 $48.00
ASTM D1791-93(2015)
Standard Test Method for Accelerated Aging of Liquid Water-Emulsion Floor Polishes..
$21.00 $42.00
ASTM A20/A20M-15
Standard Specification for General Requirements for Steel Plates for Pressure Vessels..
$42.00 $83.00
ASTM A767/A767M-09(2015)
Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement..
$29.00 $58.00