ASTM D6110-17
- Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
- standard by ASTM International, 12/01/2017
- Category: ASTM
$65.00
$33.00
1.1 This test method is used to determine the resistance of plastics to breakage by flexural shock as indicated by the energy extracted from standardized (see Note 1) pendulum-type hammers, mounted in standardized machines, in breaking standard specimens with one pendulum swing. This test method requires specimens to be made with a milled notch (see Note 2). The notch produces a stress concentration which promotes a brittle, rather than a ductile, fracture. The results of this test method are reported in terms of energy absorbed per unit of specimen width (see Note 3).
Note 1: The machines with pendulum-type hammers have been standardized in that they must comply with certain requirements including a fixed height of hammer fall, which results in a substantially fixed velocity of the hammer at the moment of impact. Hammers of different initial energies (produced by varying their effective weights), however, are recommended for use with specimens of different impact resistance. Moreover, manufacturers of the equipment are permitted to use different lengths and constructions of pendulums with possible differences in pendulum rigidities resulting (see Section 5). Be aware that other differences in machine design do exist.
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
ASTM D5667-95(2015)
Standard Test Method for Rubber From Synthetic Sources-Total and Water Soluble Ash..
$21.00 $42.00
ASTM D5902-05(2015)
Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubbe..
$21.00 $42.00
ASTM D6741-10(2015)
Standard Test Methods for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): ..
$21.00 $42.00
ASTM D7237-15a
Standard Test Method for Free Cyanide and Aquatic Free Cyanide with Flow Injection Analysis (FIA) Ut..
$33.00 $65.00