ASTM D4575-09(2015)
- Standard Test Methods for Rubber Deterioration-Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Tes
- standard by ASTM International, 07/01/2015
- Category: ASTM
$48.00
$24.00
1.1 These test methods cover the following three types of methods for the determination of ozone content in laboratory test chambers. Method A (UV absorption) is specified for reference or referee purposes and as a means of calibration for the alternative methods; Method B, instrumental device (electrochemical or chemiluminescence); and Method C, wet chemical techniques (see Appendix X1). These methods are primarily intended for use with tests for determining rubber ozone cracking resistance and thus are applicable over the ozone level range from 25 to 200 mPa.
Note 1: Prior to 1978, ozone concentrations were expressed in ASTM D11 Standards in parts per hundred million (pphm) of air by volume. See Appendix X2 for an explanation of the change to partial pressure in millipascals (mPa).
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
ASTM B929-17
Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar..
$24.00 $48.00
ASTM C1136-17
Standard Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation..
$25.00 $50.00
ASTM C1858-17
Standard Practice for Design, Construction, and Material Requirements for Direct Hung Susp..
$25.00 $50.00