ASTM D3326-07(2017)
- Standard Practice for Preparation of Samples for Identification of Waterborne Oils
- standard by ASTM International, 12/15/2017
- Category: ASTM
$48.00
$24.00
1.1 This practice covers the preparation for analysis of waterborne oils recovered from water. The identification is based upon the comparison of physical and chemical characteristics of the waterborne oils with oils from suspect sources. These oils may be of petroleum or vegetable/animal origin, or both. Seven procedures are given as follows:
|
| Sections |
| Procedure A (for samples of more than 50-mL volume containing significant quantities of hydrocarbons with boiling points above 280°C) | 8 to 12 |
| Procedure B (for samples containing significant quantities of hydrocarbons with boiling points above 280°C) | 13 to 17 |
| Procedure C (for waterborne oils containing significant amounts of components boiling below 280°C and to mixtures of these and higher boiling components) | 18 to 22 |
| Procedure D (for samples containing both petroleum and vegetable/animal derived oils) | 23 to 27 |
| Procedure E (for samples of light crudes and medium distillate fuels) | 28 to 34 |
| Procedure F (for thin films of oil-on-water) | 35 to 39 |
| Procedure G (for oil-soaked samples) | 40 to 44 |
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
ASTM F2970-15
Standard Practice for Design, Manufacture, Installation, Operation, Maintenance, Inspection and Majo..
$42.00 $83.00
ASTM D2196-15
Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer..
$29.00 $58.00
ASTM D7409-15
Standard Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns..
$21.00 $42.00
ASTM D6449-99(2015)e1
Standard Test Method for Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow Cone Metho..
$21.00 $42.00