ASTM D217-19a
- Standard Test Methods for Cone Penetration of Lubricating Grease
- standard by ASTM International, 07/01/2019
- Category: ASTM
$54.00
$27.00
1.1 These test methods cover four procedures for measuring the consistency of lubricating greases by the penetration of a cone of specified dimensions, mass, and finish. The penetration is measured in tenths of a millimetre.
Note 1: The National Lubricating Grease Institute (NLGI)2 classified greases according to their consistency as measured by the worked penetration. The classification system is as follows:
| NLGI | Worked Penetration Range, |
| 000 | 445 to 475 |
| 00 | 400 to 430 |
| 0 | 355 to 385 |
| 1 | 310 to 340 |
| 2 | 265 to 295 |
| 3 | 220 to 250 |
| 4 | 175 to 205 |
| 5 | 130 to 160 |
| 6 | 85 to 115 |
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
ASTM C755-19
Standard Practice for Selection of Water Vapor Retarders for Thermal Insulation..
$27.00 $54.00
ASTM D8215-19
Standard Practice for Statistical Modeling of Uncertainty in Assessment of In-place Coal Resources..
$33.00 $65.00
ASTM F2000-19
Standard Safety Performance Specification for Fences for Baseball and Softball Fields..
$24.00 $48.00
ASTM F2831-19
Standard Practice for Internal Non Structural Epoxy Barrier Coating Material Used In Rehabilitation ..
$24.00 $48.00