ASTM A1044/A1044M-16
- Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete
- standard by ASTM International, 01/15/2016
- Category: ASTM
$58.00
$29.00
1.1 This specification covers steel stud assemblies for shear reinforcement of concrete. Stud assemblies consist of either single-headed studs attached to a steel base rail by welding, or double-headed studs mechanically crimped into a steel shape.
Note 1: The configuration of the studs for stud assemblies is much different than the configuration of the headed-type studs prescribed in Section 7, Figure 7.1 of AWS D1.1/D1.1M. Ratios of the cross-sectional areas of the head-to-shank of the AWS D1.1/D1.1M studs range from about 2.5 to 4. In contrast, this specification requires the area of the head of the studs for stud assemblies to be at least 10 times the area of the shank. Thus, the standard headed-type studs in Section 7, Figure 7.1 of AWS D1.1/D1.1M do not conform to the requirements of this specification for use as stud assemblies for shear reinforcement.
PDF
All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.
Multi-User Access
After purchasing, you have the ability to assign each license to a specific user.
Printable
At any time, you are permitted to make printed copies for your and your members' reference use.
ASTM D4796-17
Standard Test Method for Bond Strength of Thermoplastic Pavement Marking Materials..
$24.00 $48.00
ASTM D7315-17
Standard Test Method for Determination of Turbidity Above 1 Turbidity Unit (TU) in Static Mode..
$35.00 $69.00
ASTM D5293-17
Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between -10 °..
$33.00 $65.00
ASTM D8058-17e1
Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite ..
$29.00 $58.00