• AASHTO R 43-13 (2017)

AASHTO R 43-13 (2017)

  • Standard Practice for Quantifying Roughness of Pavements
  • standard by American Association of State and Highway Transporta
  • Category: AASHTO

$78.00 $39.00

This standard practice describes a method for estimating roughness for a pavement section. An International Roughness Index (IRI) statistic is calculated from a single longitudinal profile measured with a road profiler in both the inside and outside wheelpaths of the pavement. The average of these two IRI statistics is reported as the roughness of the pavement section.
The standard practice recognizes the need for a quality assurance (QA) plan and proposes guidelines for the development of a QA plan.
Measurements of profile are made in accordance with ASTM E 950. If any part of this standard practice is in conflict with its references made, such as ASTM standards, this standard practice takes precedence for its purpose.
This standard practice is a combination of two former provisional standard practices - PP 37 Standard Practice for Determination of International Roughness Index (IRI) to Quantify Roughness of Pavements and PP 37M Standard Practice for Quantifying Roughness of Pavements.
PDF

All of our standards document are available in PDF (Portable Document Format), an electronic, downloadable format.You will be able to download the file in your account downloads.

Multi-User Access

After purchasing, you have the ability to assign each license to a specific user.

Printable

At any time, you are permitted to make printed copies for your and your members' reference use.

AASHTO TP 87-10 (2016)

AASHTO TP 87-10 (2016)

Standard of Method of Test for Measure Low-Temperature Flexural Creep Stiffness of Bituminous Sealan..

$39.00 $78.00

AASHTO TP 88-10 (2016)

AASHTO TP 88-10 (2016)

Standard of Method of Test for Evaluation of the Low-Temperature Tensile Property of Bituminous Seal..

$39.00 $78.00

AASHTO TP 89-10 (2016)

AASHTO TP 89-10 (2016)

Standard of Method of Test for Measuring Adhesion of Hot-Poured Crack Sealant Using Direct Adhesion ..

$45.00 $89.00

AASHTO TP 90-10 (2015)

AASHTO TP 90-10 (2015)

Standard of Method of Test for Measuring Interfacial Fracture Energy of Hot-Poured Crack Sealant Usi..

$34.00 $68.00